update some plots with white background

data/m03_poticalib/processing_poticalib.py

@@ -8,7 +8,8 @@ lognum = 2
 
 plt.ioff()
 plt.style.use('bmh')
-plt.figure(figsize=(11.88, 8.40))
+plt.rcParams['axes.facecolor'] = 'white'
+plt.figure(figsize=(8,6))
 data = pd.read_csv("./log_poticalib_ana_{:02d}.csv".format(lognum))
 
 print(data)
@@ -58,5 +59,4 @@ plt.title("PowerIt Calibration: Analog Potentiometer")
 plt.legend()
 #-plt.savefig("2kw_direct.png")
 
-plt.tight_layout()
-plt.savefig("adccalib_{:02d}.eps".format(lognum), format='eps', dpi=1000)
+plt.savefig("adccalib_{:02d}.pdf".format(lognum))

data/m04_cycledepends/processing_cycledepends_raw.py

@@ -21,8 +21,8 @@ plt.rcParams['axes.facecolor'] = 'white'
 fig, axarr = plt.subplots(
     2,
     1,
-    figsize=(10, 8),
-    gridspec_kw={'height_ratios':[4, 1]}
+    figsize=(8, 6),
+    gridspec_kw={'height_ratios':[4, .8]}
 )
 plt.subplots_adjust(hspace=.5)
 data = pd.read_csv("./" + __file__[:-3].split("_")[1] + append + ".csv", comment="#")
@@ -96,7 +96,6 @@ axarr[0].legend(
     ncol=3)
 plt.savefig(
     "./" + __file__[:-3].split("_")[1] + append + ".pdf",
-    dpi=1000,
-    bbox_inches='tight')
+    dpi=1000)
 
 vtt.unc_tolatex(fits[0], "0")

parts/experiments.tex

@@ -15,7 +15,7 @@ The resulting errors can be seen in figures \ref{sampleticks1} and \ref{sampleti
 
 \begin{figure}[H]
     \centering
-    \hspace*{-.16\columnwidth}
+    \hspace*{-.175\columnwidth}
     \includegraphics[width=1.3\columnwidth]{./data/m04_cycledepends/cycledepends_20180529.pdf}
     \caption{plotted difference from set input voltage, and fitted linearly, May 29th 2018, $\approx$32\si\degree C}
     \label{sampleticks1}
@@ -27,7 +27,7 @@ Important in figure \ref{sampleticks1} is the relative error in only the 0th cas
 The secondary plots confirm the 
 \begin{figure}[H]
     \centering
-    \hspace*{-.16\columnwidth}
+    \hspace*{-.175\columnwidth}
     \includegraphics[width=1.3\columnwidth]{./data/m04_cycledepends/cycledepends_20180530.pdf}
     \caption{plotted difference from set input voltage, and fitted linearly, May 30th 2018, $\approx$25\si\degree C}
     \label{sampleticks2}
@@ -42,7 +42,7 @@ The secondary plots confirm the
     \begin{figure}[H]
         \centering
         \hspace*{-.16\columnwidth}
-        \includegraphics[width=1.3\columnwidth]{./pitstop/20180621/v48.pdf}
+        \includegraphics[width=1.3\columnwidth]{../pitstop/20180809/calib_V48.pdf}
         \caption{TODOF}
         \label{v48_precalib}
     \end{figure}
@@ -53,7 +53,7 @@ The secondary plots confirm the
     \begin{figure}[H]
         \centering
         \hspace*{-.16\columnwidth}
-        \includegraphics[width=1.3\columnwidth]{./pitstop/20180706/v10_0_nocalib.pdf}
+        \includegraphics[width=1.3\columnwidth]{../pitstop/20180809/calib_v10.pdf}
         \caption{TODOF}
         \label{v10_precalib}
     \end{figure}
@@ -85,12 +85,10 @@ The secondary plots confirm the
 
     \begin{figure}[H]
         \centering
-        \hspace*{-.06\columnwidth}
-        \includegraphics[width=1.1\columnwidth]{./data/m03_poticalib/adccalib_02-eps-converted-to.pdf}
-        %\includegraphics[width=1.\columnwidth]{./pitstop/20180702/i18ana_nocalib.pdf}
-        %\includegraphics[width=1.\columnwidth]{./pitstop/20180702/i18digi_nocalib.pdf}
+        \hspace*{-.15\columnwidth}
+        \includegraphics[width=1.3\columnwidth]{./data/m03_poticalib/adccalib_02.pdf}
         \caption{TODOF}
-        \label{v18_precalib}
+        \label{fig:v18_precalib}
     \end{figure}
 
 
@@ -115,7 +113,7 @@ The secondary plots confirm the
         \begin{figure}[H]
             \centering
             \hspace*{-.16\columnwidth}
-            \includegraphics[width=1.3\columnwidth]{pitstop/20180621/i48.pdf}
+            \includegraphics[width=1.3\columnwidth]{../pitstop/20180809/calib_i48.pdf}
             \caption{Calibration of input current adcs 21.06.2018}
             \label{}
         \end{figure}
@@ -125,11 +123,12 @@ The secondary plots confirm the
     \subsubsection{1.8V Output}
         \begin{figure}[H]
             \centering
-            %\hspace*{-.16\columnwidth}
-            \vspace*{-.02\paperheight}
-            \includegraphics[width=\columnwidth]{pitstop/20180702/i18ana_nocalib.pdf}
-            \includegraphics[width=\columnwidth]{pitstop/20180702/i18digi_nocalib.pdf}
-            \caption{Pre Calibration Measurement of Output Current at the 1.8V Analog Terminal (2.7.2018)}
+            \hspace*{-.15\columnwidth}
+            %\vspace*{-.02\paperheight}
+            %\includegraphics[width=\columnwidth]{pitstop/20180702/i18ana_nocalib.pdf}
+            %\includegraphics[width=\columnwidth]{pitstop/20180702/i18digi_nocalib.pdf}
+            \includegraphics[width=1.3\columnwidth]{../pitstop/20180809/calib_i18.pdf}
+            \caption{Pre Calibration Measurement of Output Current at the 1.8V Analog and Digital Terminal (2.7.2018)}
             \label{precalib18iana}
         \end{figure}
 

parts/theory.tex

@@ -122,6 +122,13 @@ Like its counterparts, it has the same Layout
     \caption{example diagram of power wafer, 16 Reticles in use}
 \end{figure}
 
+\begin{figure}[H]
+    \centering
+    \includegraphics[width=1\columnwidth]{./pics/waferpcb.png}
+    \caption{part of the mainpcb on which a wafer is placed, in its realworld orientation, visible are the 48 Reticles and two terminals each for 1.8V Digital and Analog}
+    \label{}
+\end{figure}
+
 and each of the 48 Reticles can be accessed, digitaly as well as electricaly.
 
 For this work the circuit model in \autoref{retmodel} can be used to describe the connections, powering these Reticles.
@@ -129,7 +136,7 @@ For this work the circuit model in \autoref{retmodel} can be used to describe th
 \begin{figure}[H]
     \centering
     \includegraphics[width=.4\columnwidth]{./tikz/reticlepower.pdf}
-    \caption{model of the to measure resistances and their currents, $R_0$ describes the resistance of a connection between the PowerIt Output and up to the switch, while $R_1$ is a Resistance between the switches and Reticles. }
+    \caption{model of the to measure resistances and their currents, $R_0$ describes the resistance of a connection between the PowerIt Output and up to the FET, while $R_1$ is a Resistance between FET and Reticles. The measurement is done between a Output Terminal on the PowerIt an a correspontingpin on a Ana-Board}
     \label{retmodel}
 \end{figure}
 
@@ -174,7 +181,14 @@ Alternatively:
     \centering
     \includegraphics[width=.5\columnwidth]{tikz/reticlepower_2}
     \caption{retpow2}
-    \label{fir:retmodelshell}
+    \label{fig:retmodelshell}
 \end{figure}
 
 so we expect the voltage to change depending on the reticles distance to the nearest voltage supply pad.
+
+\begin{figure}[H]
+    \centering
+    \includegraphics[width=\columnwidth]{../pitstop/20180809/reticel_rtheo.pdf}
+    \caption{theoretr}
+    \label{fig:retmodelrdist}
+\end{figure}

preamble.tex

@@ -50,7 +50,7 @@
 \usepackage{enumitem,amssymb}
 \usepackage{amsmath}
 \usepackage{graphicx}
-\usepackage{svg}
+%\usepackage{svg}
 \usepackage{pdflscape}
 
 \definecolor{myteal}{HTML}{228c9c}