update 20180713

parts/experiments.tex

@@ -104,7 +104,7 @@ The secondary plots confirm the
 
 \section{after Calibration}
 
-\inputminted{yaml}{pitstop/pitdb.yaml}
+\minty{yaml}{./pitstop/pitdb.yaml}
 
 \subsection{Voltages}
 

parts/results.tex

@@ -29,15 +29,14 @@ Using the script any one of the following Values can be tested and calibrated:
 
 \subsubsection{Setting up the Test Environment}
 The simplest way to setup your environment consists of cloning the PItSTOP Project onto your Client:
-\begin{minted}{bash}
+\begin{mintylst}{bash}
     $ git clone https://url.to.pitstop
-\end{minted}
-then substituting the \verb|rsync| targeti:
-\begin{minted}{makefile}
-    # makefile
+\end{mintylst}
+then substituting the \verb|rsync| target:
+\begin{mintylst}[makefile]{makefile}
     all:
         rsync --progress ./*.py /remote.url/
-\end{minted}
+\end{mintylst}
 
 , to be your server (should be a RaspberyyPi connected to the PowerIt) 
 
@@ -45,15 +44,15 @@ then substituting the \verb|rsync| targeti:
 Runnig the test requires the following commands
 \\
 Serverside:
-\begin{minted}{bash}
+\begin{mintylst}{bash}
     $ python server.py
-\end{minted}
+\end{mintylst}
 Clientside:
-\begin{minted}{bash}
+\begin{mintylst}{bash}
     $ python aggregator.py
-\end{minted}
+\end{mintylst}
 Now just following the instructions given, the selected test can be run:
-\begin{minted}{text}
+\begin{mintylst}{text}
     Setting up calibration test for {}
     Please be sure to:
      - connect the {} to the RaspberryPi running server.py.
@@ -63,7 +62,7 @@ Now just following the instructions given, the selected test can be run:
     Continue (y/N): y
 
     What is the Name given to the connected PowerIt? [Bxx]: B05
-\end{minted}
+\end{mintylst}
 
 
 \section{Regulation}

parts/theory.tex

@@ -17,7 +17,7 @@ The circuits for measuring input Voltage and current are the most complex, becau
 \begin{enumerate}
     \item divide our input voltage into a usable potential range
     \item decouple the input from our signal potential
-    \item operate within the Chips possible Voltage range of 0-3.3V
+    \item operate within the Chips possible Voltage range of 0 -- 3.3V
 \end{enumerate}
 
 The already implemented Cicuit can be seen in figure \ref{mon48v}. It consists of a 1:240 Voltage Divider, a full differential operational amplifier taking in the ~200mV (nominal), and amplifying it by a factor of 8 ($r_\text{diffOpAmp}$). It is decoupling the input and output voltages, so our 48V and 3.3V circuit parts are electricly insulated. The remaining operational amplifier provides futher amplification by a factor of 1.1 ($r_\text{OpAmp}$)